24-Tooth Saw Blade Clipart (SVG)
Here’s a Scalable Vector Graphics (SVG) drawing of a 24-tooth saw blade. I needed a simple circular saw blade clipart image for a logo I’m working on, but I couldn’t find a usable one online so I created my own.…
Tag Woodworking
Bubinga and Maple Ice Cream Scoop
I picked up several of these scoop kits at Rockler a couple weeks ago to use as Christmas gifts. I used bubinga and sugar maple, and finished it with tung oil. This handle feels the best so far — both…
How Good Are Your Eyeballs?
Here’s a great little online app that will test how good you are at “eyeballing” different measurements. Drag a point or line around to make simple geometric figures. After eyeballing seven different ones three times each, you’ll get a score…
Remodeled Entry Closet, Cedar-paneled
Every time I opened our entry closet I wanted to scream. I’ve been wanting to re-do it for a long time, and I finally bit the bullet and did it. Coats, which we accessed most, were often pushed back in…
Small Entryway Table
We wanted a table with a drawer in a little nook for our entryway. I just have some finish sanding to do and then finish, but it’s pretty much assembled (except for the hardware). I should have sharpened my chisels…
Custom Router Table Extension for BT3100 Table Saw
Here’s a table extension I put together last night for the Freud Avanti Plunge Router that’s gotten a lot of press over the past few days. It’s made with some MDF, some scrap 1/2″ maple, 3/4″ oak, and 1/2″ plywood.…
Toy Sword and Shield
I came home today and my son had created a suit of armor and a sword out of cardboard and paper bags. But his sword was badly damaged — dented and bent — by the kid down the street who…
Scrap Wood Toy Violin
I was working on another rocking horse in the shop today and my son kept picking up a horse leg and pretending it was a violin. I didn’t want the leg to get damaged, but I also wanted him to…
Window Cornices
Just call me Martha Stewart. 🙂 I finally got around to making three simple fabric-covered window cornices for our reading room, using all scrap wood and about 1.5 yards of fabric that my wife picked out for about $12. 1/4″…
Bench Tool Storage Shelves
I saw this in Wood magazine a few months ago and it seemed like the perfect solution for my cramped shop. It’s made from maybe a half dozen 2×4’s, some pegboard, some scrap plywood and a little scrap MDF on…